Component Inspection
- Battery Voltage Check
- IG "ON"
- Measure the voltage between + and - terminal of battery.
Specification : Above 11V
- Is the measured voltage within specification?
YES
- Substitute with a known-good PCM and check for proper operation. If the problem is corrected, replace PCM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.NOTE: There is a memory reset function on GDS that can erase optional parts automatically detected and memorized by PCM. Before or after testing PCM on the vehicle, use this function to reuse the PCM on the others
NO
- Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
- Substitute with a known-good PCM and check for proper operation. If the problem is corrected, replace PCM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.