Camber Adjustment

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the nut holding the rear lower arm cam bolt (B).
Adjust rear camber by turning the rear lower arm cam bolt (B) clockwise or counter clockwise. Rear camber adjustment should be made by turning the right and left cam bolt by the same amount.
Camber: -1°±0.5°

Fig 1: Identifying Rear Lower Arm Cam Bolt
Courtesy of HYUNDAI MOTOR CO.
When completing the rear camber adjustment, tighten the nut to specified torque.
Tightening torque :

140 ~ 160N.m (14.0 ~ 16.0kgf.m, 101 ~ 116lb-ft)