LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2012 >> Soul Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control Diagnosis >> DTC C1702: Variant Coding Error >> Inspection/Repair >> Component Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection

  1. IG "OFF".
  2. IG "ON".
  3. Connect GDS and select "Diagnostic Trouble Codes(DTCs)" mode.
  4. Using a GDS, Clear DTC.
  5. Select "Diagnostic Trouble Codes(DTCs)" mode again.
  6. Are any DTCs present?

    YES 

    Substitute with a known-good HECU and check for proper operation. If problem is corrected, replace HECU and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NOTE: * In a case of replacing HECU, operate following functions
    1. "Steering Angle Sensor Calibration" for steering angle sensor offset correction (refer to C1261 STEERING ANGLE SENSOR NOT CALIBRATED ) - ESC only
    2. "Longituginal Sensor Calibration" for Longituginal sensor offset correction (refer to C1285 SENSOR CLUSTER CHANGE DETECTION-UNCALIBRATED ) - ESC only

    NO 

    Fault is intermittent caused by faulty HECU or was repaired and HECU memory was not cleared. go to "VERIFICATION OF VEHICLE REPAIR " procedure.