LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2012 >> Sedona EX >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Blower Unit >> Repair Procedures >> Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad.

    Refer to CRASH PAD REPLACEMENT .

  3. Disconnect the connectors from the intake actuator, the blower motor and power mosfet.
  4. Remove the cowl cross bar assembly.

    Refer to COWL CROSS BAR ASSEMBLY REPLACEMENT .

  5. Remove the blower unit (A) from the heater unit after loosening a mounting bolt and 2 screws.
    Fig 1: Identifying Blower Unit
    G07390236Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Make sure that there is no air leaking out of the blower and duct joints.
  6. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals