LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle System Diagnosis) >> DTC P0716: AT Input Speed Sensor High Input >> Verification of Vehicle Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Verification of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode.
  2. Using a scantool, Clear DTC.
  3. Operate the vehicle within DTC Enable conditions in General information.
  4. Are any DTCs present?

    YES

    1. Go to the applicable troubleshooting procedure.

    NO

    1. System performing to specification at this time.
scientia non olet · About LEMON Manuals