October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Replacement

Remove the battery and air cleaner.
Remove the output shaft speed sensor (A).

Fig 1: Identifying Output Shaft Speed Sensor, Connector, & Bolt
Courtesy of KIA MOTORS AMERICA, INC.
1. Disconnect the output shaft speed sensor connector (B).
2. Remove the bolt (C).
3. Inspect the output shaft speed sensor bore.
Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
Installation is the reverse of removal.