LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Rondo EX, 2.7 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 2.4L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Component Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect ECTS connector.
  3. Remove the ECTS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between ECTS terminals 3 and 4.
  5. Check that the resistance is within the specification.

    Specification:  Refer to SPECIFICATION  section.

scientia non olet · About LEMON Manuals