LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Optima V6-2.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> Accelerator Position Sensor (APS)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accelerator Position Sensor (APS)





Inspection

1. Connect a scantool on the Data Link Connector (DLC).
2. Turn the ignition switch ON.
3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.

Specification : Refer to "Specification"


4. Turn ignition switch OFF and disconnect the scantool from the DLC.
5. Disconnect APS connector.
6. Measure resistance between the APS terminals 4 and 5 (APS 1).

Specification : Refer to "Specification"


7. Measure resistance between the APS terminals 1 and 6 (APS 2).

Specification : Refer to "Specification"


scientia non olet · About LEMON Manuals