October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Sensor Initiating Procedure

SENSOR INITIATING PROCEDURE
1. Read the four sensor's ids starting with sensor 1 (1 normally front left, 2 front right, 3 rear left, 4 rear right).

2. Connect 'TPMS exciter' to the diagnostic connector.

3. Register the four sensor's ids to the receiver.

4. Disconnect diagnostic link.
5. Cycle Ignition, wait 4 minutes and check that Normal Receiver State is now indicated.