Repair Procedures: Removal
- Disconnect the battery (-) terminal.
- Remove the front propeller shaft (A). (4WD)
- Remove the front muffler (A) or muffler hanger rubber (B), by removing rear muffler (C).
- Remove the rear propeller shaft (A).
- Support the transmission assembly with a jack
- Remove the cross member (A).
- Remove the insulator support bracket (A).
- Disconnect the 4WD ECU connector (A) or EMC connector (B).
- Remove the mounting bolts (A, B-4ea) and the transfer assembly.
- Remove the transfer assembly by lowering the supporting jack.