LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2008 >> Rio Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) >> DTC P0343 Camshaft Position Sensor A Circuit High Input >> Ground Circuit Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ground Circuit Inspection

  1. Key "OFF".
  2. Disconnect CMPS connector.
  3. Key "ON".
  4. Measure the voltage between terminal 2 of CMPS harness connector and chassis ground (A).
  5. Measure the voltage between terminal 2 and 3 of CMPS harness connector (B).

    Specification: "A" - "B" = Below 200mV

  6. Is the measured voltage within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals