LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2008 >> Amanti >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P0480 Fan 1 Control Circuit Malfunction >> Power Circuit Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Circuit Inspection

  1. IG "OFF" and disconnect Cooling fan module connector.
  2. IG "ON" & ENG "OFF"
  3. Measure voltage between terminal 1 of Cooling fan module harness connector and chassis ground.

    Specification : Approx. B+

  4. Is the measured voltage within specification ?

    YES 

    NO 

    • Check if cooling fan fusible link 60A is open or not installed,
    • Check if cooling fan relay is not installed or faulty
    • Check if the line between cooling fan relay and Cooling fan module is open.
    • Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals