Procedures

SERVICE ADJUSTMENT PROCEDURES

REPLACEMENT OF TRANSAXLE GEAR OIL

Transaxle gear oil :
Hypoid gear oil, SAE 75W/90 (API GL-4)


1. With the vehicle parked on a level surface, remove the drain plug and drain the transaxle oil.
2. Replace the gasket with a new one and install the drain plug(A).

Drain plug tightening torque :
30 - 35Nm (300 - 350kg-cm, 22 - 25lb-ft)





3. Add new oil through the filler plug(A) and, fill it to just below the plug opening.

Transaxle oil total capacity :
2.15 lit (2.25 U.S.qts., 1.95 Imp.qts.)


Filler plug tightening torque :
30 - 35Nm (300 - 350kg-cm, 22 - 25lb-ft)