LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Sedona LX >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Power Window Switch >> Replacement >> Driver/Assist Door Module (DDM/ADM)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Driver/Assist Door Module (DDM/ADM)

  1. Remove (-) negative battery terminal.
  2. Remove the front door trim panel. (Refer to FRONT DOOR )
  3. Disconnect the door module mounting screws (5EA) after disconnecting the module connectors (3EA) from the motor.
    Fig 1: Identifying Door Module And Mounting Screws
    G04884951Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the door module (DDM/ADM) (A) from the front door trim panel.
    Fig 2: Identifying Front Door Modules
    G04884952Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals