LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (2.5L V6 Engine) >> Torque Specifications
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Torque Specifications

WARNING: This page is about a different car, the 2001 Kia Optima and 2001 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Air Intake Surge Tank
Mounting Bolt/Nut 11-14 (15-19)
Auto Tensioner Arm Bolt 26-40 (35-54)
Camshaft Sprocket Bolt 65-80 (88-108)
Connecting Rod Cap Bolt
Step 1 12-14 (16-19)
Step 2 Additional 90-94 Degrees
Crankshaft
Main Bearing Cap Bolt
M8 Bolt
Step 1 10-13 (14-18)
Step 2 Additional 90-95 Degrees
M10 Bolt
Step 1 20-24 (27-33)
Step 2 Additional 90-95 Degrees
Pulley Bolt 130-138 (176-187)
Cylinder Head Bolt (1)
Step 1 18 (24)
Step 2 Additional 60-64 Degrees
Step 3 Additional 45-49 Degrees
Engine Mounts
Insulator Bolt 65-80 (88-108)
Bracket Bolt/Nut 43-58 (58-79)
Front Roll Stopper
Bracket-To-Subframe Bolt 43-58 (58-79)
Bracket-To-Transaxle Bolt 43-58 (58-79)
Insulator Bolt/Nut 37-48 (50-60)
Rear Roll Stopper
Bracket-To-Subframe Bolt 37-48 (50-60)
Bracket-To-Transaxle Bolt 36-47 (49-64)
Insulator Bolt/Nut 36-47 (49-64)
Transaxle Mount
Bracket Bolt/Nut 43-58 (58-79)
Insulator Bolt 65-80 (88-108)
Exhaust Manifold-To-Cylinder Head Nut 18-22 (24-30)
Exhaust Pipe
Pipe-To-Manifold Nut 22-29 (30-39)
Pipe-To-Catalytic Converter Bolt 29-43 (39-58)
Flywheel-To-Crankshaft Bolt 53-55 (72-75)
Intake Manifold Mounting Bolt/Nut 14-15 (19-20)
Oil Pan Drain Plug 26-32 (35-43)
Oil Pan Screen Bolt 11-15 (15-20)
Oil Pump Relief Valve Plug 29-36 (39-48)
Starter
Bolt 20-25 (27-34)
Nut 14-22 (19-30)
Thermostat Housing 11-14 (15-19)
Throttle Body-To-Intake Manifold Bolt 11-15 (15-20)
Timing Belt Assembly
Auto Tensioner Fixed Bolt 14-20 (19-27)
Auto Tensioner Pulley Bolt 31-40 (42-540
Idler Pulley Bolt 36-43 (48-58)
Water Pump Mounting Bolt 11-16 (15-22)
INCH Lbs. (N.m) 
Camshaft Bearing Cap Bolt 89-106 (10-12)
Cylinder Head Cover Bolts 44-53 (5-6)
Exhaust Manifold Heat Shield Bolt 106-133 (12-15)
Oil Pan Bolt
Lower Pan 89-106 (10-12)
Upper Pan (2)
Oil Pressure Switch 71-106 (8-12)
Oil Pump
Case Bolt 106-133 (12-15)
Cover Screw 71-106 (8-12)
Rear Oil Seal Case Bolt 89-106 (10-12)
Timing Belt Assembly Cover Bolt 89-106 (10-12)
Water Pump Pulley Bolt 71-89 (8-10)
(1) Tighten in sequence with engine cold. See Figure.
(2) See OIL PUMP  under REMOVAL & INSTALLATION for bolt identification and tightening specifications.