Rain Sensor: Installation

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

In case of the windshield with reflection layer which reflects the infrared rays in sensing field, remove the reflection layer from the rain sensor mounting position prior to installation.
Bracket and spring slide need for installing the rain sensor, it is covered by sensor cover.

Install the rain sensor bracket to the windshield glass using the tape

Fig 1: Installing Rain Sensor Bracket To Windshield Glass
Courtesy of KIA MOTORS AMERICA, INC.
Rain sensor Installation
The two springs should be closed simultaneously. Once closed, press the housing forward to ensure proper adhesion of the sensor to the windshield.

Fig 2: Installing Rain Sensor
Courtesy of KIA MOTORS AMERICA, INC.
Connect the rain sensor connector, and then install the sensor cover.
CAUTION: It is very important that the coupling pad pushes against the windshield completely to prevent bubbles from forming at the contact surface.