October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Signal Circuit Inspection

IG "OFF".
Disconnect IATS connector.
IG "ON" & ENG "OFF".
Measure voltage between terminal 5 of IATS harness connector and chassis ground.
Specification: Approx. 5V
Is the measured voltage within specification?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.