LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2006 >> Spectra5 2.0 2, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (DTC Troubleshooting Procedures) >> Inspection Chart For Diagnostic Trouble Codes (DTC) >> DTC P0605 Internal Control Module Read Only Memory (ROM) Error >> Verification Of Vehicle Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2007 Kia Spectra5 and 2007 Kia Spectra. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode.
  2. Press F4 (DTAL) and confirm that "DTC Readiness Flag" indicates "Complete". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions.
  3. Read "DTC Status" parameter.
  4. Is parameter displayed "History (Not Present) fault"?

    YES 

    • System performing to specification at this time. Clear the DTC.

    NO 

    • Go to the applicable troubleshooting procedure.
scientia non olet · About LEMON Manuals