DTC P2414 Ho2S Exhaust Sample Error-Bank 1 Sensor 1: DTC Detecting Condition

DTC DETECTION CONDITION REFERENCE CHART

Item	Detecting Condition	Possible Cause
DTC Strategy	Sensor not mounted - Plausability check in Part load or Full load	Abnormal installation of HO2S Contact resistance in connectors
Enable Conditions	Sensor tip temp. > 650°C(1202°F) Part load or full load 11V < Battery voltage < 16V No relevant failure
Threshold Value	3.2V < Front H02S signal < 4.8V (during 30 sec.)
Diagnostic Time	30 sec.
Mil On Condition	2 Driving Cycles