LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2005 >> Rio Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Fuel System & Fault Isolation) >> Components >> Knock Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor: Installation

WARNING: This page is about a different car, the 2004 Kia Rio. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install sensor and tighten bolt.
  2. Install wire harness.
  3. Reinstall intake manifold support bracket.
    Fig 1: Illustrating Connector
    G02181420Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals