LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2005 >> Rio Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures >> DTC Troubleshooting >> DTC P0340: Camshaft Position Sensor Circuit Malfunction >> General Information >> DTC Detecting Condition
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

General Information: DTC Detecting Condition

DTC DETECTING CONDITION AND POSSIBLE CAUSES

Item Detecting Condition Possible Cause
DTC Strategy
  • Check Camshaft Signal Switching
  • Open or short in signal, ground or power supply circuit
  • Contact resistance in connectors
  • Misadjusted crankshaft and camshaft pulley position
  • Faulty CMP sensor
Enable Conditions
  • No Crankshaft Sensor Signal Error
  
Threshold Value
  • Signal level shift is out of window by tooth number counter
    • CAM high: 55 +/- 3 teeth
    • CAM low: 115 +/- 3 teeth
Diagnostic Time
  • Continuous
scientia non olet · About LEMON Manuals