General Information: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Real engine speed & target engine speed are monitored
|
- Poor connection
- Intake system or throttle plate for blockage
- Vapor hoses for crack/connection
- Malfunctioning ISCA
- Open or short in ISCA circuit
- Malfunctioning TPS
- Malfunctioning Accelerator cable
- Malfunctioning PCM
|
| Enable Conditions |
- Idle speed control "ON"
- Engine coolant greater than or equal to 77°C (170.6°F)
- Battery voltage greater than or equal to 10.3V
- Vehicle speed = 0
|
| Threshold value |
- Real engine speed < Target engine speed -100 rpm (time that above fulfilled greater than or equal to 10 sec)
|
| Diagnostic Time |
|
| MIL ON condition |
|