LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2004 >> Rio Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System & Fault Isolation >> DTC Troubleshooting >> DTC P1586: At/Mt Encoding Error >> Inspection/Repair >> W/Harness Inspection >> Terminal and Connector Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Terminal and Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES

    1. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO

    1. Go to "SIGNAL CIRCUIT INSPECTION " procedure.
scientia non olet · About LEMON Manuals