LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2002 >> Sedona EX V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Position Sensor >> Diagrams >> Diagnostic Aids >> Testing >> How to Check For Continuity
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

How to Check For Continuity

Inspection




1. When a tester is used to check for continuity or to measure voltage, insert tester probe from wire harness side.
2. Check terminals of waterproof connectors from connector side because they cannot be accessed from harness side.






NOTE:
a. Use a fine wire to prevent damage to the terminal
b. Do not damage the terminal when inserting the tester lead.
scientia non olet · About LEMON Manuals