LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 1994 >> Sephia LS, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System >> Circuit Testing >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit Testing: Notes

NOTE: Perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance. Voltage readings may vary slightly due to battery condition or charging rate.

Checking pin voltages/resistances at the electronic time and alarm ECM wiring harness connector determines whether it's receiving and transmitting proper signals. Locate electronic time and alarm ECM and check for voltage or resistance with connector connected (backprobe connector) as indicated. SeeFig 1 . If value is not as specified, repair as necessary.

Fig 1: Electronic Time & Alarm ECM Voltage/Resistance Test Terminals
G94C46526
scientia non olet · About LEMON Manuals