Set Condition

• C053D  - The PCM determines that the Brake Pedal Pressure Sensor signal is irrational.
• C10F5  - The PCM determines that the Brake Torque signal is irrational.
• P057B  - The PCM determines that the Brake Pedal Position Sensor signal is irrational.
• U0121  - The PCM does not receive the Brake Pedal Position Sensor signal.
• U0129  - The PCM does not receive the Brake Pedal Pressure Sensor signal.
• U0418  - The PCM receives an SNA message indicating that the has detected a fault in the Brake Pedal Pressure Sensor signal.
• U11BF  - The PCM receives an SNA message indicating that the has detected a fault in the Brake Pedal Position Sensor signals
• (C0501, C0507, C050D, C0513) Wheel Speed Signal Rationality Faults  - When at a stop, one WSS signal is showing vehicles speed output and the other three WSS signals are reading 0 OR When the difference between one WSS signal compared to the other three WSS signals is more than 11 MPH, for 30 seconds.
• (U1409, U140A, U140B, U140C, U1412, U1417, U1418) Implausible Wheel Speed and Distance Signal Faults  - These faults will typically set when the BSCM detects a fault with one of the WSS signals. The BSCM will send an SNA or error flag against the sensor.

The (P057B, C053D, C10F5, U0418, U11BF) performance and implausible/lost message faults can set for any of the following: