October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal And Installation: Installation
 Courtesy of CHRYSLER GROUP, LLC
|
- Position the wireless charging pad module (2) to the wireless charging bracket (3), then install the fasteners (1) and tighten them securely.
 Courtesy of CHRYSLER GROUP, LLC
|
- Position the wireless charging module bracket into the floor console.
- Connect the wire harness connector (3) to the wireless charging pad module.
- Slide the tab on the front of the wireless charging module bracket (1) into the slot on the front of the floor console.
- Lower the rear of the wireless charging bracket until the retaining tabs (2) are fully engaged into the floor console.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the wireless charging pad mat (1).
- Install the shifter bezel. Refer to BEZEL, SHIFTER, REMOVAL AND INSTALLATION
.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.