October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal And Installation: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
 Courtesy of CHRYSLER GROUP, LLC
|
- Remove the cover (2) from the door panel (1).
- Remove the bolt (3) from door panel (1)
 Courtesy of CHRYSLER GROUP, LLC
|
- Lift the switch bezel (2) up and then lift out of the door panel (1).
- Disconnect the wiring harness connector.
 Courtesy of CHRYSLER GROUP, LLC
|
- Carefully disengage the switch bezel (1) from the switch bank (2), by releasing the switch bezel retaining clips.