October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Pedal, Accelerator: Installation
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the accelerator pedal. Tighten the three screws (2) to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
- Connect the accelerator pedal wire harness connector (1).
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
- Use a scan tool and perform the APPS RELEARN function.