October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Module, Fuel Pump, Control: Installation
 Courtesy of CHRYSLER GROUP, LLC
|
- Position the Fuel Pump Control Module (FPCM) (1) onto the studs and install nuts (2) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
- Connect the FPCM wire harness connector.
- Install quarter trim panel. Refer to PANEL, QUARTER TRIM, INSTALLATION
.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.