LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2023 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> 2.0L Exhaust System >> Sensor, Differential Pressure >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Sensor, Differential Pressure: Installation

GC0186539Courtesy of CHRYSLER GROUP, LLC
  1. If removed, install the differential pressure sensor tubes (2) and securely tighten.
  2. If removed, install the engine belly pan. Refer to BELLY PAN, INSTALLATION .
    GC0186926Courtesy of CHRYSLER GROUP, LLC
  3. If removed, install the differential pressure hoses to the tubes.
    GC0186465Courtesy of CHRYSLER GROUP, LLC
  4. Connect the differential pressure sensor hoses (6).
  5. Install the differential pressure sensor (2) and securely tighten the nuts (1).
  6. Install the retainer (5) and securely tighten the nut (4).
  7. Connect the differential pressure sensor wire harness connector (3).
    GC0186948Courtesy of CHRYSLER GROUP, LLC
  8. Install the radiator closeout panel (2) and the 10 push pin fasteners (1).
  9. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals