LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Wagoneer Series II, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Power Side Step (PSSM) >> Module Programming >> PSSM Programming
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

PSSM Programming

Please perform the following steps when the Power Side Step Module (PSSM) has been replaced:

  1. Connect the diagnostic scan tool to the vehicle.
  2. Perform the vehicle PROXI Alignment procedure.
  3. Navigate to the PSSM "Misc. Functions" menu to select and perform the hard reset routine.
  4. While in the PSSM menu, enable/configure the PSSM function.
scientia non olet · About LEMON Manuals