LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Compass Trailhawk >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Trailer Tow (TTM) >> Removal And Installation >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation: Installation

  1. Position the TTM in the vehicle.
  2. Connect the TTM wire harness connectors.
  3. Engage the retaining clip securing the TTM to the body.
  4. Install the left rear storage tub.
  5. Connect the negative battery cable.
NOTE:

If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to determine if alignment of the PROXI configuration data into the new ECU is needed. If PROXI alignment is needed, follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under the Body Control Module (BCM) Miscellaneous Functions menu.

scientia non olet · About LEMON Manuals