LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Power Seats (Service Information)) >> Switch, Lumbar Control >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the lumbar control switch is not damaged.
  2. Install the lumbar control switch to the seat side shield.
  3. Connect the wire harness connector to the lumbar control switch.
  4. Install the seat side shield. Refer to SIDE SHIELDS, SEAT CUSHION, FRONT, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals