Left Cylinder Head

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
NOTE:
Mark the Variable Valve Timing (VVT) solenoid connectors (1) with a paint pen or equivalent so that they may be reinstalled in their original locations.
Mark the intake VVT solenoid (4) and the exhaust VVT solenoid (2) with a paint pen or equivalent so that they may be installed in their original locations.
Disconnect the wire harness connector (1) from the VVT solenoid (2, 4).
Remove the VVT solenoid mounting bolts (3).

Courtesy of CHRYSLER GROUP, LLC
Remove the VVT solenoid from the cylinder head cover.
NOTE:
The seal (1) can be reused if not damaged.