LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Cherokee Trailhawk >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Relay, In-Rush Current Reduction >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Relay, In-Rush Current Reduction: Installation

GC0159959Courtesy of CHRYSLER GROUP, LLC
  1. Position the In-Rush Current Relay (ICR) to the bracket.
  2. Install the screws (3) securing the ICR to the bracket and tighten securely.
  3. Connect and fasten the two terminal ends to the ICR, then tighten the two nuts (2) to the proper specifications. Refer to Refer to TORQUE SPECIFICATIONS - GAS ENGINE ..
  4. Connect the wire harness connector (1) to the ICR.
  5. Connect the negative battery cable(s). Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals