October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal And Installation: Installation
 Courtesy of CHRYSLER GROUP, LLC
|
- Position the steering column (1b) to the vehicle. Install the steering column to dash frame bolts (1a) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS
.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the steering column to dash frame nuts (4) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS
.
- Connect the EPS wire harness connectors (1).
- Install and tighten the ground cable bolt (2).
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the intermediate shaft (1b) to the steering gear.
- Install a NEW
intermediate shaft pinch bolt (1a) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS
.
- Install the driver knee airbag. Refer to AIR BAG, KNEE BLOCKER, REMOVAL AND INSTALLATION
.
- Install the sentry key antenna. Refer to ANTENNA, SENTRY KEY, REMOVAL AND INSTALLATION
.
- Install the Steering Column Control Module (SCCM). Refer to MODULE, STEERING COLUMN CONTROL (SCCM), REMOVAL AND INSTALLATION
.
- Install the steering wheel. Refer to WHEEL, STEERING, REMOVAL AND INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.