LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Compass Limited, FWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Gear >> Removal And Installation >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation: Installation

GC0188519Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering gear (2) to the crossmember (3).
  2. Install and tighten the two steering gear bolts (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  3. Position the heat shield then install the two heat shield bolts (4) and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  4. Install the crossmember. Refer to CROSSMEMBER, FRONT SUSPENSION, REMOVAL AND INSTALLATION or CROSSMEMBER, REAR SUSPENSION, REMOVAL AND INSTALLATION or CROSSMEMBER, REAR SUSPENSION, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals