LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Compass Limited, FWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Column >> Wheel, Steering >> Removal And Installation >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation: Installation

GC0179316Courtesy of CHRYSLER GROUP, LLC
  1. If removed, install the steering wheel switches.
  2. Position the steering wheel (3) on the shaft, aligning the references on the steering wheel and on the steering column.
  3. If equipped, install the steering wheel damper.
  4. Connect the steering wheel wire harness connector (1).
  5. Install a NEW  steering wheel nut (2) and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  6. Install drivers airbag. Refer to AIR BAG, DRIVER, REMOVAL AND INSTALLATION .
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals