LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Compass Altitude, 4WD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Arm, Lower Control >> Removal And Installation >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal And Installation: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  3. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
  4. Remove the lower load beam. Refer to LOAD BEAM, LOWER, REMOVAL AND INSTALLATION .
  5. Disconnect the outer tie rod end from the steering knuckle and, Refer to TIE ROD, STEERING, REMOVAL AND INSTALLATION .DISCARD  the outer tie rod end nut.
    GC0178789Courtesy of CHRYSLER GROUP, LLC
  6. Remove and DISCARD  the lower control arm rear bolt (2).
  7. Remove and DISCARD  the lower control arm front bolt (3).
    GC0179084Courtesy of CHRYSLER GROUP, LLC
  8. Remove and DISCARD  the steering knuckle pinch bolt (1) and nut.
  9. Remove the lower ball joint (3) from the steering knuckle (4).
  10. Remove the lower control arm.
scientia non olet · About LEMON Manuals