October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal And Installation: Installation
- Position the generator to the engine compartment for installation.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the upper and lowers generator mounting bolts (1) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
 Courtesy of CHRYSLER GROUP, LLC
|
- Connect the wiring harness to the generator stud. Install the retaining nut and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the exhaust manifold heat shield cover (2).
- Install the oxygen sensor wiring bracket (1).
- Connect the oxygen sensor wiring (1).
 Courtesy of CHRYSLER GROUP, LLC
|
- Connect the upstream oxygen sensor wiring harness connector to the sensor (1).
- Install the accessory drive serpentine belt. Refer to BELT, SERPENTINE, REMOVAL AND INSTALLATION
.
- Install the right front wheel. Refer to REMOVAL AND INSTALLATION
.
- Install the engine beauty cover. Refer to
COVER, ENGINE, REMOVAL AND INSTALLATION
COVER, ENGINE, REMOVAL AND INSTALLATION
COVER, ENGINE, REMOVAL AND INSTALLATION
.
- Connect the negative battery cable.