October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal And Installation: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
 Courtesy of CHRYSLER GROUP, LLC
|
- Insert the (special tool #C-4755, Trim Stick) under the rearward end (1) of the switch bank assembly (2) and lift to release from the door panel.
- Disconnect the wiring harness connector.
 Courtesy of CHRYSLER GROUP, LLC
|
- Carefully disengage the switch bezel (1) from the switch bank (3), by releasing the switch bezel retaining clips (2).