LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.0L Fuel System) >> Fuel Injection, Gas >> Sensor, Air Temperature, Inlet >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Air Temperature, Inlet: Installation

WARNING: This page is about a different variant/trim than selected.
GC0186717Courtesy of CHRYSLER GROUP, LLC
  1. Install the Inlet Air Temperature (IAT) sensor (2).
  2. Connect IAT sensor wire harness connector (1).
  3. Install the engine covers. Refer to COVER, ENGINE, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals