LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee High Altitude, Full Time T/Case Control >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Relay, In-Rush Current Reduction >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Relay, In-Rush Current Reduction: Installation

GC0159959Courtesy of CHRYSLER GROUP, LLC
  1. Position the In-Rush Current Relay (ICR) to the bracket.
  2. Install the screws (3) securing the ICR to the bracket and tighten securely.
  3. Connect and fasten the two terminal ends to the ICR, then tighten the two nuts (2) to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
  4. Connect the wire harness connector (1) to the ICR.
  5. Connect the negative battery cable(s). Refer to INSTALLATION .
scientia non olet · About LEMON Manuals