LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee High Altitude, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (3.2L Engine (Service Information)) >> Engine Block >> Damper, Vibration >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Damper, Vibration: Removal

WARNING: This page is about a different variant/trim than selected.
GC0158465Courtesy of CHRYSLER GROUP, LLC
NOTE:

The serpentine belt does not need to be fully removed from the vehicle.

  1. Rotate the belt tensioner (1) counterclockwise and remove the serpentine belt (4) from the crankshaft vibration damper (8) only.
    NOTE:

    A force greater than 350 N. m (260 ft. lbs.) may be required to remove the crankshaft vibration damper bolt.

    GC0144221Courtesy of CHRYSLER GROUP, LLC
  2. Hold the crankshaft vibration damper (1) with Vibration Damper Holder (special tool #10198, Holder, Vibration Damper) (2) and remove the crankshaft vibration damper bolt.
  3. Pull the crankshaft vibration damper (1) from the crankshaft.
scientia non olet · About LEMON Manuals