LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2020 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (3.6L Engine (Service Information)) >> Engine Block >> Damper, Vibration >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Damper, Vibration: Removal

WARNING: This page is about a different variant/trim than selected.
GC0144221Courtesy of CHRYSLER GROUP, LLC
  1. Remove the accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL, 3.6L .
    NOTE:

    A force greater than 350 Nm (260 ft. lbs.) may be required to remove the crankshaft vibration damper bolt.

  2. Hold the crankshaft vibration damper (1) with Vibration Damper Holder (special tool #10198, Holder, Vibration Damper) (2) and remove the crankshaft vibration damper bolt.
  3. Pull the crankshaft vibration damper (1) from the crankshaft.
scientia non olet · About LEMON Manuals