Sensor, Accelerator Pedal Position: Installation
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
The accelerator pedal and APPS (Accelerator Pedal Position Sensor) are serviced as a complete assembly.
- Install the accelerator pedal/APPS assembly (2) and securely tighten screw (1).
 Courtesy of CHRYSLER GROUP, LLC
|
- Connect the APPS wire harness connector (3).
- Before starting engine, operate accelerator pedal to check for any binding.
- Connect the negative battery cable.