Shaft, Intermediate, Lower: Installation

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

1 - INTERMEDIATE SHAFT

2 - MASTER CYLINDER

CAUTION:

Steering column module is centered to the vehicles steering system. Failure to keep the system and steering column module centered and locked/inhibited from rotating can result in steering column module damage.

Install the shaft (1) in from the top by the master cylinder (2).

Courtesy of CHRYSLER GROUP, LLC
Install lower intermediate shaft coupler (2) to upper intermediate shaft (1).
Install bolt (3) and tighten to 42 N.m (31 ft. lbs.).

Courtesy of CHRYSLER GROUP, LLC
Slide lower intermediate shaft coupler onto steering gear pinion shaft (3).
Install coupler pinch bolt (2) and tighten to 45 N.m (33 ft. lbs.)