Sensor, Dynamics: Description
NOTE:
If the dynamics sensor is replaced, it must be initialized using the scan tool.
The yaw rate, lateral acceleration and longitudinal acceleration sensors are housed into one unit known as the dynamics sensor (2). The sensor is used to measure vehicle rotational sensing (how fast the vehicle is turning - yaw), side-to-side (lateral) motion and longitudinal acceleration (forward). The dynamics sensor (2) has one electrical connector (1) is located on the floor panel transmission tunnel under the center floor console, in front of the Occupant Restraint Controller (ORC) module (3).
Yaw and Lateral Acceleration Sensors cannot be serviced separately. The entire Dynamics Sensor must be replaced when necessary.