Switch, Memory: Removal

NOTE:

Take the proper precautions to protect the face of the door panel from cosmetic damage while performing this procedure.

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable.
Remove the driver door trim panel and place it on a workbench. Refer to PANEL, DOOR TRIM, REMOVAL .
Disconnect the wire harness connector (1) from the memory seat switch (2).

Courtesy of CHRYSLER GROUP, LLC
Using Trim Stick (special tool #C-4755, Trim Stick) or equivalent, gently disengage the two retaining tabs (1 and 3) that secure the memory seat switch (2) to the back of the driver door trim panel (4).
Remove the memory seat switch from the driver door trim panel.